We will show you how to turn off the DHCP Server so CUJO can work in DHCP mode.

You will need to change the DHCP Settings as set out below if you wish to connect your router to CUJO in "DHCP mode".


Connect CUJO:

At this point your CUJO has to be connected using just bottom CUJO port:


Activate DHCP mode using CUJO app:

Before turning off the DHCP server on your Router you have to activate it on CUJO (DHCP server will not be started yet until you reboot CUJO).

If you see the manual setup instructions page on the CUJO app, this means the DHCP server was activated on CUJO.


Turn OFF DHCP on your Router:

Once you have connected CUJO and activated DHCP mode on it, you can turn off DHCP on your Router;

1) Login to your Linksys router using the link and credentials below;


Username: Admin

Password: [none]


2) Navigate to "Net" -> "LAN"

Select "Disable" under "DHCP Server" mode

To save changes click "Save" button

3) Reboot CUJO (unplug power from CUJO and plug it back) and router.


Once both devices reboot, CUJO will start protecting all your network devices connected to D-Link Router.