We will show you how to turn off the DHCP Server and change your Router's IP address so CUJO can work in DHCP mode.

You will need to make the changes as set out below to the DHCP Settings Settings if you wish to connect your Router to CUJO in "DHCP mode".


Connect CUJO:

At this point your CUJO has to be connected using just bottom CUJO port:


Activate DHCP mode using CUJO app:

Before turning off the DHCP Server on your Router you have to activate it on CUJO (DHCP server will not be started yet until you reboot CUJO).

If you see the manual setup instruction page on the CUJO app, this means your DHCP server was activated on CUJO.


Turn OFF DHCP Server on your Router:

Once you have connected CUJO and activated the DHCP mode on your CUJO device you can turn off the DHCP on your router;

1) Login to your Asus router through using the link and credentials below;


Username: admin

Password: admin(or the one you set as you first logged on to the router)

2) Navigate to "Advanced Settings" -> "LAN" -> "DHCP Server"

Under "Enable the DHCP Server" select option "No"

To save changes click "Apply" button.

3) Your router will reboot.

4) Reboot CUJO (unplug power from CUJO and plug it back).


Once both devices reboot, CUJO will start protecting all your network devices connected to Asus router.