We will show you how to turn a Portal WiFi Router into an Access Point.

You have to change this router to become an Access Point if you need to connect it to CUJO in "Bridge mode".


Router as Access Point

At this point don't connect your CUJO to your Network just yet, and follow below steps:


1) Login to your Portal WiFi Router by using below link and credentials:


Password: password


2) Navigate to "LAN IP" -> "Settings" select "Bridge Mode" and push "Apply" button



Now your Portal WiFi router is acting as an Access Point.


Connect CUJO


At this point you could connect CUJO between your ISP Router and your Access Point

  • Connect CUJO's bottom Ethernet port to your ISP Router which provides DHCP server and serves as Internet source.
  • Connect CUJO's top Ethernet port to any WAN port of your Portal WiFi Router acting as an Access Point.




If you did everything correctly as described above, your CUJO will be up and running and will start protecting your Network.