DHCP mode: Plusnet Router (Technicolor TG582n)
Modified on: Tue, 4 Sep, 2018 at 10:35 AM
We will show you how to turn off the DHCP Server so that your CUJO can work in DHCP mode.
You will need to change the DHCP Settings as set out below, if you wish to connect your router to CUJO in "DHCP mode".
At this point your CUJO must be connected using just the bottom CUJO port:
Activate DHCP mode using CUJO app:
Before turning off the DHCP server on your Router you have to activate it on CUJO (DHCP server will not be started yet until you reboot CUJO).
If you see the manual setup instructions page on the CUJO app, this means the DHCP server was activated on CUJO.
Turn OFF DHCP on your Router:
Once you have connected CUJO and activated DHCP mode on it, you can turn off DHCP on your Router;
1) Login to your Linksys router using the link and credentials below;
Password: printed on the back of your router
2) Navigate to "Home Network" -> "Interfaces" -> "Local Area Network" -> "Configure"
Un-check the box next to"Use DHCPv4 Server"
To save changes click "Apply" button.
3) Reboot CUJO (unplug power from CUJO and plug it back)
Once both devices reboot, CUJO will start protecting all your network devices connected to Linksys Router.
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.