We will show you how to turn a Netgear router into an Access Point.

You will have to change this router to become an Access point if you wish to connect it to CUJO in "Bridge mode".


Router as Access Point:

At this point don't connect your CUJO to your Network just yet, and follow below steps:


1) Login to your Netgear Router by using below link and credentials:


Username: admin

Password: password


2) Navigate to "Advanced" tab -> "Advanced Setup" -> "Wireless AP".

Click on the Check box "Enable AP Mode" and click "Apply" button as show below;


Now your Netgear Router is acting as Access Point.


Connect CUJO;

At this point you could connect CUJO between your ISP Router and your Access Point;

  • Connect CUJO's bottom Ethernet port to your ISP Router which provides DHCP server and serves as Internet source.
  • Connect CUJO's top Ethernet port to any WAN port of your Netgear Router acting as an Access Point.


If you did everything correctly as described above, your CUJO will be up and running and will start protecting your Network from Hackers.