We will show you how to turn Eero Router into an Access Point.

You have to change this router to become an Access Point if you need to connect it to CUJO in "Bridge mode".


To connect in Bridge mode you will need to have an additional router with DHCP server enabled. This is usually your ISP’s (internet service provider) router/modem combo box. We will call it source router.

Before continuing make sure:

  1. DHCP server is enabled in source router

  2. DHCP server is disabled and not running in CUJO (if not set otherwise default setting is DHCP off)

First you have to open your eero mobile app and set it to bridge mode:

  1. In eero app open menu bar

  1. From menu choose “Network settings”

  1. Tap on “Advanced Settings”

  1. In “Advanced Settings” window open “DHCP & NAT” configuration window

  1. Select Bridge mode and Save changes


Now your eero will function in bridge mode.

It’s time to connect your CUJO device:

  1. Disconnect your eero from source router

  2. Connect your CUJO bottom port with source router and any of the LAN ports using the ethernet cable.

  3. Connect your CUJO top port with any available eero port.

  4. Plug in the power cord to your CUJO device.

Once CUJO starts, it will protect your network.